Inkcazo:

I-H-type clamp luhlobo lokulinganisa olungathwali mthwalo.Imveliso isebenzisa izinto ezifana nocingo lwe-aluminium.Kwiqondo lokushisa elihlukeneyo, i-clamp kunye nocingo zihambelana nokwandiswa kwe-thermal kunye nokunciphisa ucingo, kwaye ukusebenza kombane kuzinzile kakhulu.

Emva kwe-crimping, i-clamp kunye ne-conductor idibaniswe kumzimba omnye, kwaye umqhubi uhlanganiswe ngokupheleleyo kwaye ugubungele ngokupheleleyo.Akukho ndawo kwindawo yoqhagamshelwano phakathi komqhubi kunye ne-trunk.Ukuchasana kuphantsi kwaye ukunyuka kweqondo lokushisa kuphantsi.I-groove ye-conductive ifakwe kwi-conductive paste kwi-trunk ye-clamp.Ukususa ifilimu ye-aluminium chloride yocingo kunokunyusa indawo yoqhagamshelwano.Ukwamkela isicwangciso soyilo sokwandisa i-anode, ukudibanisa kwe-aluminium yebhodwe kunokuphepha impembelelo yokubola kombane.

Iimbonakalo:

1. Ukwandisa i-anode kunye nokunciphisa uqhagamshelwano lombane;

2. Nokuba ukuhanjiswa kwangoku kunye nokuchasana okuncinci;

3. ukunyuka kweqondo lokushisa eliphantsi, ukunciphisa ukungaphumeleli;

4. usebenzisa iipliers zobuchwephesha be-hydraulic, uxinzelelo olulinganayo, umgangatho ozinzile.

Isicelo:

1. I-voltage ephezulu, ephakathi kunye nephantsi inokudityaniswa: Iyakwazi ukuhlangabezana nokudityaniswa kweendlela ezahlukeneyo zombane ophezulu, ophakathi kunye ophantsi ongeyena i-tension.

2. Uxhulumaniso lwasimahla lweedayamitha ezahlukeneyo zocingo: Inokwanelisa (16-240mm2) imidibaniso eyahlukeneyo yeedayamitha ezahlukeneyo zocingo ukuze kudityaniswe ngokuthanda.

3. Ukuqhagamshelwa okungahleliwe kwezixhobo ezahlukeneyo: Inokudibana nazo zonke iintlobo zezinto (i-aluminium yocingo, i-copper core, i-aluminium core insulated wire, i-steel core aluminium stranded wire, i-copper stranded wire, njl.

Uhlobo	Umgca ongundoqo		B ukwandiswa		I-crimp
	Ukusika ucingo	Uluhlu lomgca wekliphu	Ukusika ucingo	Uluhlu lomgca wekliphu	Ubude L	i	Inani le
H-11	16 ~ 35	4.8 ~ 8.2	16 ~ 35	4.8 ~ 8.2	44	O	2
H-21	50 ~ 95	8.3 ~ 14.6	16 ~ 50	4.8 ~ 9.6	63	D	3
H-22	50 ~ 95	10.0 ~ 14.6	50 ~ 95	10.0 ~ 14.6	63	D	3
H-31	95 ~ 240	13.0 ~ 22.4	16 ~ 70	4.8 ~ 11.4	63	N	3
H-32	95 ~ 240	13.0 ~ 22.4	70 ~ 120	11.6 ~ 16.0	63	N	3
H-41	150 ~ 240	16.2 ~ 22.4	150 ~ 240	16.2 ~ 22.4	89	N	4

Faka isixhobo:

1.Iithongo zeHydraulic ezinoxinzelelo lwe-12T, zixhotyiswe ngeeseti ezintathu ze "O, D, N" die

2. Xa i-crimping, i-hydraulic pliers kufuneka ikhuphe ngokupheleleyo ukukhutshwa koxinzelelo oluzenzekelayo, kwaye enye i-mold igqityiwe.